Are you in search of a approach to enhance the safety of your private home? Are you looking out for an clever doorbell that may allow you to regulate your entrance door regardless of the place you’re? It’s possible you’ll now relaxation straightforward realizing that the Ring Doorbell is the reply to all of your queries. This text will stroll you thru the method of establishing your Ring Doorbell step-by-step, guaranteeing that you’ve a stress-free expertise.
Earlier than we begin, ensure you have the next instruments and supplies available: a drill, a screwdriver, a stage, a hammer, a pencil, and a tape measure. To put in your Ring Doorbell efficiently, additionally, you will want the next: a Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver. After getting collected all the obligatory provides, you’ll be able to start establishing your Ring Doorbell.
Armed with the mandatory instruments and supplies, you are now able to dive into the set up course of. Don’t fret, we’ll break it down into manageable steps so you’ll be able to take pleasure in peace of thoughts realizing you have secured your private home’s entry level.
The best way to Set up Ring Doorbell
Earlier than you begin the set up, ensure you collect all the mandatory instruments and supplies, together with the Ring Doorbell, mounting bracket, doorbell transformer, doorbell wires, drill, screwdriver, stage, hammer, pencil, and tape measure.
- Flip off energy to doorbell.
- Take away present doorbell.
- Set up mounting bracket.
- Join doorbell wires.
- Mount Ring Doorbell.
- Degree and safe Ring Doorbell.
- Restore energy to doorbell.
- Take a look at Ring Doorbell.
After getting put in your Ring Doorbell, obtain the Ring app and observe the on-screen directions to finish the setup course of. You possibly can then use the app to regulate your Ring Doorbell and obtain notifications when somebody rings your doorbell or triggers the movement sensor.
Flip off energy to doorbell.
Earlier than you start putting in your Ring Doorbell, it’s important to show off the facility to your present doorbell. It will stop any electrical shocks and guarantee that you could work safely.
-
Find your doorbell breaker.
That is often situated in your house’s electrical panel. The doorbell breaker is usually labeled “Doorbell” or “Chime.”
-
Flip off the doorbell breaker.
After getting discovered the doorbell breaker, flip it to the “Off” place. It will lower off energy to your doorbell.
-
Take a look at the doorbell.
Press the doorbell button to make it possible for it’s not working. If the doorbell nonetheless rings, then you haven’t efficiently turned off the facility. Verify the breaker once more and make it possible for it’s within the “Off” place.
-
Take away the quilt out of your doorbell chime.
After getting confirmed that the facility is off, you’ll be able to take away the quilt out of your doorbell chime. It will expose the doorbell wires.
Now that you’ve turned off the facility to your doorbell, you’ll be able to safely proceed with the set up of your Ring Doorbell. Bear in mind to all the time observe the directions supplied within the Ring Doorbell consumer guide.
Take away present doorbell.
After getting turned off the facility to your doorbell, you’ll be able to proceed with eradicating the prevailing doorbell. This course of will range relying on the kind of doorbell you’ve gotten.
-
Take away the doorbell button.
The doorbell button is usually held in place by one or two screws. Use a screwdriver to take away the screws after which gently pry the doorbell button off the wall.
-
Disconnect the doorbell wires.
After getting eliminated the doorbell button, you will notice two wires linked to the again of the button. These are the doorbell wires. Use a pair of pliers to twist the wire nuts counterclockwise after which pull the wires aside.
-
Take away the doorbell chime.
The doorbell chime is often situated inside your private home, close to the entrance door. Take away the quilt from the chime after which disconnect the wires from the chime terminals. As soon as the wires are disconnected, you’ll be able to take away the chime from the wall.
-
Patch the holes.
After getting eliminated the doorbell button and chime, you may be left with two holes in your wall. You possibly can patch these holes with spackling compound or caulk.
Now that you’ve eliminated the prevailing doorbell, you’re prepared to put in your Ring Doorbell. Ensure to observe the directions supplied within the Ring Doorbell consumer guide.
Set up mounting bracket.
The mounting bracket is what’s going to maintain your Ring Doorbell in place. It is very important set up the mounting bracket accurately, in order that your Ring Doorbell is stage and safe.
-
Select a location for the mounting bracket.
The very best location for the mounting bracket is subsequent to your entrance door, at a top of about 4 toes from the bottom. Ensure that the placement you select is stage and that there are not any obstructions, comparable to bushes or shrubs, that may block the view of the Ring Doorbell.
-
Mark the placement of the mounting holes.
Use a pencil to mark the placement of the 2 mounting holes on the wall. Ensure that the marks are stage.
-
Drill the mounting holes.
Use a drill to drill two holes on the marks you made within the earlier step. The holes needs to be deep sufficient to accommodate the anchors that got here with the Ring Doorbell.
-
Insert the anchors.
Insert the anchors into the holes you simply drilled. Faucet the anchors in with a hammer till they’re flush with the wall.
-
Screw the mounting bracket to the wall.
Use the screws that got here with the Ring Doorbell to screw the mounting bracket to the wall. Ensure that the mounting bracket is stage and safe.
Now that you’ve put in the mounting bracket, you’re prepared to attach the doorbell wires and mount the Ring Doorbell.
Join doorbell wires.
After getting put in the mounting bracket, you want to join the doorbell wires to the Ring Doorbell. The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime.
To attach the doorbell wires, observe these steps:
-
Strip the ends of the doorbell wires.
Use a wire stripper to take away about 1/2 inch of insulation from the ends of the doorbell wires. -
Twist the ends of the doorbell wires collectively.
Twist the ends of the 2 doorbell wires collectively tightly. -
Insert the twisted wires into the terminals on the Ring Doorbell.
Insert the twisted wires into the “Entrance” and “Rear” terminals on the Ring Doorbell. Ensure that the wires are inserted all the way in which into the terminals and that they’re making good contact. -
Tighten the terminal screws.
Use a screwdriver to tighten the terminal screws till the doorbell wires are safe.
Now that you’ve linked the doorbell wires, you’re able to mount the Ring Doorbell to the mounting bracket.
Word: If you’re putting in a Ring Doorbell Professional, additionally, you will want to attach the facility adapter to the Ring Doorbell Professional. The facility adapter plugs into an outlet close to your doorbell.
Mount Ring Doorbell.
Now that you’ve linked the doorbell wires, you’re able to mount the Ring Doorbell to the mounting bracket.
-
Align the Ring Doorbell with the mounting bracket.
Place the Ring Doorbell over the mounting bracket in order that the screw holes on the Ring Doorbell line up with the screw holes on the mounting bracket.
-
Insert the screws.
Insert the screws that got here with the Ring Doorbell into the screw holes. Ensure that the screws are tight and that the Ring Doorbell is safe.
-
Degree the Ring Doorbell.
Use a stage to make it possible for the Ring Doorbell is stage. If the Ring Doorbell is just not stage, loosen the screws and alter the place of the Ring Doorbell till it’s stage.
-
Tighten the screws.
As soon as the Ring Doorbell is stage, tighten the screws till they’re comfortable.
Now that you’ve mounted the Ring Doorbell, you’ll be able to restore energy to the doorbell and take a look at the Ring Doorbell.
Degree and safe Ring Doorbell.
After getting mounted the Ring Doorbell to the mounting bracket, it is very important stage and safe it.
-
Use a stage to examine if the Ring Doorbell is stage.
Place a stage on prime of the Ring Doorbell. If the bubble within the stage is centered, then the Ring Doorbell is stage. If the bubble is just not centered, then you want to alter the place of the Ring Doorbell till it’s stage.
-
Tighten the screws that safe the Ring Doorbell to the mounting bracket.
Use a screwdriver to tighten the screws that safe the Ring Doorbell to the mounting bracket. Ensure that the screws are tight and that the Ring Doorbell is safe.
-
Apply silicone sealant across the edges of the Ring Doorbell.
It will assist to weatherproof the Ring Doorbell and forestall water harm. Use a caulk gun to use a skinny bead of silicone sealant across the edges of the Ring Doorbell.
-
Enable the silicone sealant to dry fully.
Earlier than you take a look at the Ring Doorbell, permit the silicone sealant to dry fully. This will take a number of hours or in a single day.
After getting leveled and secured the Ring Doorbell, you’ll be able to restore energy to the doorbell and take a look at the Ring Doorbell.
Restore energy to doorbell.
After getting put in the Ring Doorbell and examined it, you’ll be able to restore energy to the doorbell.
-
Activate the doorbell breaker.
Find the doorbell breaker in your house’s electrical panel. Flip the breaker to the “On” place. It will restore energy to the doorbell.
-
Take a look at the Ring Doorbell.
Press the doorbell button to make it possible for the Ring Doorbell is working correctly. The Ring Doorbell ought to mild up and it’s best to hear a chime inside your private home.
-
Obtain the Ring app.
If you have not already completed so, obtain the Ring app from the App Retailer or Google Play Retailer. Create an account and observe the on-screen directions to attach your Ring Doorbell to your Wi-Fi community.
-
Arrange your Ring Doorbell.
As soon as your Ring Doorbell is linked to your Wi-Fi community, you need to use the Ring app to arrange your Ring Doorbell. This consists of setting your movement detection settings, privateness settings, and notification settings.
Now that you’ve restored energy to the doorbell and arrange your Ring Doorbell, you can begin utilizing it to watch your private home and reply the door from wherever.
Take a look at Ring Doorbell.
After getting restored energy to the doorbell and linked it to your Wi-Fi community, it’s best to take a look at the Ring Doorbell to make it possible for it’s working correctly.
-
Press the doorbell button.
The Ring Doorbell ought to mild up and it’s best to hear a chime inside your private home.
-
Open the Ring app.
In your smartphone, open the Ring app and faucet on the Ring Doorbell that you simply need to take a look at.
-
View the dwell video feed.
You need to now be capable to see a dwell video feed from the Ring Doorbell. If you happen to do not see a dwell video feed, examine to make it possible for the Ring Doorbell is linked to your Wi-Fi community and that the Ring app is updated.
-
Take a look at the movement detection.
Stroll in entrance of the Ring Doorbell and see if the movement sensor is triggered. The Ring Doorbell ought to ship you a notification in your smartphone when the movement sensor is triggered.
If you’re having issues testing your Ring Doorbell, you’ll be able to contact Ring help for assist.
FAQ
Have extra questions on putting in your Ring Doorbell? Take a look at these continuously requested questions and solutions.
Query 1: What instruments do I want to put in my Ring Doorbell?
Reply 1: You have to a drill, a screwdriver, a stage, a hammer, a pencil, and a tape measure. Additionally, you will want the Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver.
Query 2: Do I want to show off the facility to my doorbell earlier than I set up it?
Reply 2: Sure, it’s best to all the time flip off the facility to your doorbell prior to installing it. It will stop any electrical shocks and guarantee that you could work safely.
Query 3: How do I join the doorbell wires to the Ring Doorbell?
Reply 3: The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime. Twist the ends of the doorbell wires collectively and insert them into the terminals on the Ring Doorbell.
Query 4: How do I mount the Ring Doorbell to the wall?
Reply 4: First, set up the mounting bracket on the wall. Then, align the Ring Doorbell with the mounting bracket and insert the screws. Ensure that the Ring Doorbell is stage and safe.
Query 5: How do I take a look at my Ring Doorbell?
Reply 5: After getting put in the Ring Doorbell, activate the facility to the doorbell and press the doorbell button. The Ring Doorbell ought to mild up and it’s best to hear a chime inside your private home. It’s also possible to take a look at the movement detection by strolling in entrance of the Ring Doorbell.
Query 6: What do I do if I am having issues putting in my Ring Doorbell?
Reply 6: If you’re having issues putting in your Ring Doorbell, you’ll be able to contact Ring help for assist.
Query 7: Can I set up my Ring Doorbell myself?
Reply 7: Sure, you’ll be able to set up your Ring Doorbell your self. Nevertheless, if you’re not comfy working with electrical wiring, you could need to rent knowledgeable to put in it for you.
Closing Paragraph for FAQ: These are just some of probably the most continuously requested questions on putting in a Ring Doorbell. When you have some other questions, please seek the advice of the Ring Doorbell consumer guide or contact Ring help.
Now that you understand how to put in a Ring Doorbell, listed here are a couple of ideas that will help you get probably the most out of your new doorbell.
Suggestions
Listed below are a couple of ideas that will help you get probably the most out of your new Ring Doorbell:
Tip 1: Select the fitting location in your Ring Doorbell.
The very best location in your Ring Doorbell is subsequent to your entrance door, at a top of about 4 toes from the bottom. Ensure that the placement you select is stage and that there are not any obstructions, comparable to bushes or shrubs, that may block the view of the Ring Doorbell.
Tip 2: Use a powerful Wi-Fi sign.
The Ring Doorbell requires a powerful Wi-Fi sign to operate correctly. When you have a weak Wi-Fi sign within the space the place you need to set up the Ring Doorbell, you could want to make use of a Wi-Fi extender or booster to enhance the sign energy.
Tip 3: Arrange movement detection and notifications.
The Ring Doorbell has a built-in movement sensor that can be utilized to set off notifications in your smartphone. You possibly can customise the movement detection settings to solely obtain notifications for sure kinds of movement, comparable to folks or autos.
Tip 4: Join your Ring Doorbell to different sensible house units.
The Ring Doorbell will be linked to different sensible house units, comparable to sensible lights and sensible locks. This lets you create automated actions, comparable to turning on the lights when somebody rings the doorbell or unlocking the door while you reply the doorbell out of your smartphone.
Closing Paragraph for Suggestions: By following the following tips, you will get probably the most out of your new Ring Doorbell and revel in all the advantages that it has to supply.
Now that you understand how to put in and use your Ring Doorbell, you’ll be able to benefit from the peace of thoughts that comes with realizing that you could monitor your private home and reply the door from wherever.
Conclusion
Putting in a Ring Doorbell is an effective way to enhance the safety of your private home and regulate your property. By following the steps on this information, you’ll be able to simply set up your Ring Doorbell your self and begin having fun with all the advantages that it has to supply.
Abstract of Foremost Factors:
- Flip off the facility to your doorbell earlier than you start set up.
- Take away your present doorbell.
- Set up the mounting bracket.
- Join the doorbell wires to the Ring Doorbell.
- Mount the Ring Doorbell to the mounting bracket.
- Degree and safe the Ring Doorbell.
- Restore energy to the doorbell.
- Take a look at the Ring Doorbell.
Closing Message: Together with your Ring Doorbell put in, now you can take pleasure in peace of thoughts realizing that you could monitor your private home and reply the door from wherever. It’s also possible to use the Ring Doorbell to attach with different sensible house units and create automated actions to make your private home much more safe and handy.
